Like most people, you probably rely on your smartphone to keep you connected with the world around you. Whether checking messages, browsing the web, or checking your calendar, a smartphone is essential in today’s world. And like any other device, smartphones need to be serviced and replaced from time to time. That’s why when you buy a new Motorola Moto G Play 2021 (XT2093-7) LCD Display Assembly Flash Gray, we want you to know that our team is here to help.
What is the Motorola Moto G Play 2021?
The Moto G Play 2021 is a budget-friendly phone with a 5.5-inch HD LCD and a 16GB storage capacity. It was released in the summer of 2020 and is available on Motorola’s website and some select retailers.
The Moto G Play 2021 is powered by a 1.4GHz quad-core processor and comes with 2GB of RAM. It also has an 8MP rear camera and a 5MP front-facing camera. The phone has a 3,000mAh battery and supports 802.11b/g/n Wi-Fi, Bluetooth 4.1, and GPS.
The Motorola Moto G Play 2021 is available in grey, and it is priced at Cell Phone Repair Parts
Parts of the Motorola Moto G Play 2021
If you have a Motorola Moto G Play (XT-) LCD Display Assembly Flash Gray and are experiencing issues with the display, your first step should be to replace the entire assembly. This guide will show you how to replace the assembly.
If you only need to fix the display, follow these steps:
1) Unplug the power cable from the back of the phone.
2) Remove the battery cover.
3) Remove the screws that hold the rear housing in place.
4) Carefully pull out the rear housing and remove it from the phone.
5) Remove any debris or corrosion that may be obscuring the display screen.
6) Replace the display screen by reversing these steps. Make sure to replace all screws and tighten them properly.
How to replace the LCD Display Assembly on the Motorola Moto G Play 2021
If you’re experiencing issues with your Motorola Moto G Play 2021’s LCD assembly, it may be time to replace it. This guide will show you how to do just that.
Before you start, ensure you have the correct tools and supplies ready. You’ll need a Phillips head screwdriver, a spudger, a soldering iron, and some solder.
First, remove the battery cover on the bottom of the phone by gently pushing it down on one side and then pulling it up. Once the cover is off, you’ll see five screws holding it in place. Remove them all and set them aside.
Next, use the Phillips head screwdriver to remove the two screws that hold the back cover (one at the top and one at the bottom). Set those aside as well.
Now use the spudger to pry up the LCD assembly from its mounts. It should come out quite easily if you’re using gentle pressure. Make sure to save any plastic clips or pieces that came with the assembly, though – you’ll need them later.
Once the LCD assembly is free, carefully place it onto a clean surface. There are still some traces of adhesive left on lcd phone parts,
Conclusion
If you are in the market for a new Motorola Moto G Play 2021 (XT2093-7) LCD assembly, get a unit with the Gray colour option. This particular model has been designed to look great on any device or case and will help make your phone look its best. If you need help finding a grey Motorola Moto G Play 2021 (XT2093-7) LCD assembly, check out our selection today.
